Isocheck ResiScreed 6, 8 & 10

Treated floor with: Isocheck ResiScreed 6

Impact Improvement: 25dB Δ L_w

Tested as a single layer. Composition prevents water transmission which can impair acoustic performance.

• Site results (in red) for Building Control approval.
• Laboratory results (in blue) for comparison.

Treated floor with: Isocheck ResiScreed 8

Impact Improvement: 25dB Δ L_w

Tested as a single layer. Composition prevents water transmission which can impair acoustic performance.

• Site results (in red) for Building Control approval.
• Laboratory results (in blue) for comparison.

Treated floor with: Isocheck ResiScreed 10

Impact Improvement: 25dB Δ L_w

Tested as a single layer. Composition prevents water transmission which can impair acoustic performance.

• Site results (in red) for Building Control approval.
• Laboratory results (in blue) for comparison.

Isocheck ResiScreed 6, supplied by Isomass Ltd. Unit 14 Papworth Business Park, Stirling Way, Papworth Everard, Cambridgeshire CB23 3GY and installed in accordance with manufacturer's instructions / recommendations.

Isocheck ResiScreed 8, supplied by Isomass Ltd. Unit 14 Papworth Business Park, Stirling Way, Papworth Everard, Cambridgeshire CB23 3GY and installed in accordance with manufacturer's instructions / recommendations.

Isocheck ResiScreed 10, supplied by Isomass Ltd. Unit 14 Papworth Business Park, Stirling Way, Papworth Everard, Cambridgeshire CB23 3GY and installed in accordance with manufacturer's instructions / recommendations.

The floor surface should be swept free of any loose debris that may damage or bridge the system.

Butt joint and seal all roll edges of Isocheck ResiScreed 6. At perimeters overlap ResiScreed 6 onto a right angle flanking edge strip which should be turned up all vertical surfaces to allow a minimum 50mm to protrude above the intended FFL of the screed.

Perimeter overlaps or butt joints should be sealed with a min 100mm wide Isocheck jointing tape.

Services that penetrate the screed should be isolated by wrapping with ResiScreed 6 which again would be taped.

When trafficking the floor take care not to perform any unnecessary actions that may cause any of the taped joints to be forced apart.

The floor surface should be swept free of any loose debris that may damage or bridge the system.

Butt joint and seal all roll edges of Isocheck ResiScreed 8. At perimeters overlap ResiScreed 8 onto a right angle flanking edge strip which should be turned up all vertical surfaces to allow a minimum 50mm to protrude above the intended FFL of the screed.

Perimeter overlaps or butt joints should be sealed with a min 100mm wide Isocheck jointing tape.

Services that penetrate the screed should be isolated by wrapping with ResiScreed 8 which again would be taped.

When trafficking the floor take care not to perform any unnecessary actions that may cause any of the taped joints to be forced apart.

The floor surface should be swept free of any loose debris that may damage or bridge the system.

Butt joint and seal all roll edges of Isocheck ResiScreed 10. At perimeters overlap ResiScreed 10 onto a right angle flanking edge strip which should be turned up all vertical surfaces to allow a minimum 50mm to protrude above the intended FFL of the screed.

Perimeter overlaps or butt joints should be sealed with a min 100mm wide Isocheck jointing tape.

Services that penetrate the screed should be isolated by wrapping with ResiScreed 10 which again would be taped.

When trafficking the floor take care not to perform any unnecessary actions that may cause any of the taped joints to be forced apart.

• min 80kg/m² - 65mm sand cement screed or 40mm liquid proprietary screed
• Optional plastic sheeting - to aid screed pouring and maintain joints in Isocheck ResiScreed 6
• Isocheck ResiScreed 6
• ≥300kg/m² minimum structural beam and block floor with optional levelling screed
• 75mm min. void formed by metal frame suspended ceiling system and ≥10kg/m² fire-rated board ceiling

• min 80kg/m² - 65mm sand cement screed or 40mm liquid proprietary screed
• Optional plastic sheeting - to aid screed pouring and maintain joints in Isocheck ResiScreed 8
• Isocheck ResiScreed 8
• ≥300kg/m² minimum structural beam and block floor with optional levelling screed
• 75mm min. void formed by metal frame suspended ceiling system and ≥10kg/m² fire-rated board ceiling

• min 80kg/m² - 65mm sand cement screed or 40mm liquid proprietary screed
• Optional plastic sheeting - to aid screed pouring and maintain joints in Isocheck ResiScreed 10
• Isocheck ResiScreed 10
• ≥300kg/m² minimum structural beam and block floor with optional levelling screed
• 75mm min. void formed by metal frame suspended ceiling system and ≥10kg/m² fire-rated board ceiling

Download datasheet

Download datasheet

Download datasheet

Find Isocheck ResiScreed 6 on NBS Source for detailed specifications and BIM objects.

Find Isocheck ResiScreed 8 on NBS Source for detailed specifications and BIM objects.

Find Isocheck ResiScreed 10 on NBS Source for detailed specifications and BIM objects.